youtube Linkedin
Solution Finder
search
    location-marker Webshop
    en

    sawing, peeling, cutting, chipping, flaking, profiling

    Industrial knives & saws for the wood industry

    Sawmill Industry Veneer and Plywood Industry Wood Processing Pulp Industry Troubleshooting

    There is a solution to every problem!

    You have a problem and can't get anywhere? We are happy to assist you with our know-how and experience. In the following articles we will discuss problems in the sawmill industry and give you tips on how to solve them

    Cracks in the base body (sawn timber capping)
    The customer notices cracks in the saw blade during the dismantlement of the chop saw. Tip: Generally, a broken/ripped/cracked saw blade should be replaced and not used any further.
    Learn more
    Poor cutting quality (sawn timber cut to size)
    The costumer notices breakouts (fringes) during cut-to-size. These breakouts are unacceptable, since the product is cut for sale at this point.
    Learn more
    Cracks in the saw blade
    Occasionally, there may be some cracking in the tooth gullet/base. This phenomenon mainly occurs with cut-off saws in set-tooth execution. Repair of the crack is not possible; the saw blade has to be ...
    Learn more

    There is a solution to every problem!

    You have a problem and can't get anywhere? We are happy to assist you with our know-how and experience. In the following articles, we discuss problems in the veneer and plywood industry and give tips on how to solve them.

    Blue stain on veneer
    "Blue stain” spots on the veneer sheets are a reaction of tannic acid from the wood and the iron in the steel of the knife and/or the pressure bar. This phenomenon can be found in wood species with ...
    Learn more
    Varying Thickness of Veneer
    Mainly in peeling operation seen direct after the sheets are peeled. Possible reasons for varying thickness: 1. wrong knife and/or pressure bar set-up 2. Small chippings (dent) on the cutting edge of ...
    Learn more
    Rough Veneer Surface
    Target of most customers in the veneer and plywood industry is to achieve a smooth surface on the veneer sheets. Exeptions: Peeled veneer sheets for plywood core in mass production are not so ...
    Learn more
    TKM-Service-Set

    TKM Service-Set / TKM Refreshment-Kit

    Our Service-Set is designed for direct use in the grinding room and our Refreshment-Kit for the direct use on the veneer and peeling machine. It enables the ideal preparation and reconditioning of the knife edge for the specific peeling or slicing process.
    Learn more

    There is a solution to every problem!

    You have a problem and can't get anywhere? We are happy to assist you with our know-how and experience.
    The following articles deal with problems in wood processing and give tips on how to solve them.

    Knife breaks
    Due to many possible causes chipper knives or counter knives can break.
    Learn more
    Wood chip quality (Chipping)
    The customer notices an increasing amount of too small and/or oversized wood chips.
    Learn more
    Knife Cracks (Wood processing)
    The chipper/flaker knives sometimes break which might have various reasons:
    Learn more

    There is a solution to every problem!

    You have a problem and can't get anywhere? We are happy to assist you with our know-how and experience. The following articles deal with problems in the pulp industry and give tips on how to solve them.

    Knife breaks
    Due to many possible causes chipper knives or counter knives can break.
    Learn more
    Wood chip quality (Chipping)
    The customer notices an increasing amount of too small and/or oversized wood chips.
    Learn more
    Sprühbeschichtung

    Thermal sprayed coating

    The process of thermal spray coating is one of the most important aspects for us to give our customers a real advantage by using our finished products.
    Through this coating, the properties of the different materials are modified and significantly improved.

    Learn more
    Service-für-die-Holzindustrie

    Wood is one of the oldest and most
    important raw materials in our world.

    We consider our customers and their different requirements for our products to be as individual and unique as the raw material wood.

    We support you not only regarding the improvement and optimization of the classical parameters such as:

    • Service life increase
    • Increase in cutting quality
    • Feed rate maximization
    • Cutting kerf reduction

    but stand by your side, especially in problematic situations and application questions, by providing targeted, solution-oriented advice.
    Learn more

    Your direct line

    You can reach us by telephone at +49 21 91 969 325 and by e-mail at: wood@tkmgroup.com

    In a hurry? Then use quick and easy the following contact form and we will get back to you!