The customer notices cracks in the saw blade during the dismantlement of the chop saw. Tip: Generally, a broken/ripped/cracked saw blade should be replaced and not used any further.
Occasionally, there may be some cracking in the tooth gullet/base. This phenomenon mainly occurs with cut-off saws in set-tooth execution. Repair of the crack is not possible; the saw blade has to be ...
"Blue stain” spots on the veneer sheets are a reaction of tannic acid from the wood and the iron in the steel of the knife and/or the pressure bar. This phenomenon can be found in wood species with ...
Mainly in peeling operation seen direct after the sheets are peeled. Possible reasons for varying thickness: 1. wrong knife and/or pressure bar set-up 2. Small chippings (dent) on the cutting edge of ...
Target of most customers in the veneer and plywood industry is to achieve a smooth surface on the veneer sheets. Exeptions: Peeled veneer sheets for plywood core in mass production are not so ...
